RSN Kovinski Oksid Film Upori Ognjevarna Lastnosti: 1. Električni in mehanski stabilnost in vjeoko zanesljivost. 2 Nonflame slika, Topilo dokaz, odporen do toplota & 3. vlažnost. 4. Letna premik je nizka za the okrepljeno kovina oksid film. 5. Nizka nojee lahko pridelati vjeoko resjetance vrednee ki 6. žica rana resjedors lahko ne doseg.
RSN Metal Oxide Film Resistors Flameproof
|
Products |
RSN Metal Oxide Film Resistors Flameproof |
|
Features |
1. Electrical and mechanical stability and high reliability. 2. Nonflame painting, Solvent proof, resistant to heat & 3. humidity. 4. Annual shift is low for the strengthened metal oxide film. 5. Low noise can produce high resistance values which 6. wire wound resistors can not reach. |
Electrical And Mechanical Performance:
|
Characteristics |
Standards |
Test Methods |
|
Resistance Tolerance |
±5%(J)or±2%(G) |
. |
|
Resistance Temp. Coeff. |
±300 ppm/°C |
-55*C ~ 155qC |
|
Power Rating Load |
Surface temp. 235 °C Max.△R/R≤±1% |
Rated voltage for 30 minutes |
|
Short Time Overload |
±1% |
2.5 times of rated voltage for 5 seconds.
|
|
Dielectric Withstanding Voltage |
No evidence of mechanical damage or insulation breakdown.
|
Max. Working Voltage for 1 min. |
|
Insulation Resistance |
1.000MΩ |
DC100V or 500V megger |
|
Terminal Strength |
No evidence of mechanical damage. |
< 1/2W:1 kg >1W：2kg |
|
Solder-ability |
Minimum95%coverage |
235±5*C for 2 seconds |
|
Resistance to Soldering Heat |
No evidence of mechanical damage.△R/R≤±1% |
270 ±5*0 for 10 ±1 seconds 350±10*C for 3.5 ±0.5 seconds |
Environmental Characteristics:
|
Characteristics |
Standards |
Test Methods |
|
Temp. Cycle |
△ R/R≤±1% |
-55°C( 30 min.) —► Room Temp.( 3 min.) —►+155°C(30 min.) —► Room Temp.( 3 min.)/( 5 cycles) |
|
Load Life |
△R/R≤±5% |
Rated power load 90 minutes ON 30 minutes OFF 70°C 1000 hours |
|
Moisture-proof Load Life |
△R/R≤±5% |
Rated power load 90 minutes ON 30 minutes OFF 40°C95%RH 500 hours |
|
Nonflammability |
not flamed |
16 times of rated wattage for 5 min.
|
Dimensions:
|
Rated Wattage |
D±1 |
L±1 |
H±3 |
d±0.1 |
Resistance (0) |
Max. Working Voltage |
Max. Overioad Voltage |
|
1/4W |
2.6±0.5 |
6.8 |
28 |
0.6 |
0.22~33K |
250V |
400V |
|
1/2W |
3.0 |
9 |
28 |
0.65 |
0.22~33K |
300V |
400V |
|
1W |
4.5 |
11 |
28 |
0.8 |
0.22~50K |
350V |
600V |
|
2W |
5.0 |
15 |
28 |
0.8 |
0.22~50K |
350V |
600V |
|
3WL |
8.5 |
24 |
38 |
0.8 |
0.22-100K |
500V |
800V |
|
4W |
8.5 |
32 |
33 |
0.8 |
0.22~150K |
500V |
800V |
|
5W |
8.5 |
41 |
38 |
0.8 |
0.22~200K |
750V |
1000V |
|
7W |
8.5 |
53 |
38 |
0.8 |
0.22~200K |
800V |
1500V |
Derating Curve:
For resistors operated in ambient temperatures above 70 ℃，power rating must be derated in accordance with the curve below.
Surface Temperature Rise:
